Preparation and Properties of Sintering Additives Coated Si3N4 from Heterogeneous Nucleation Processing

The sintering additives such as Al2O3 and /or Y2O3 were coated on the surfaces of Si3N4 particles via heterogeneous nucleation processing using a buffered pH solution as the precipitation reagent .They nucleated and grew only on the surfaces of Si3N4 and did not form sol particles in solution by TEM observation .The isoelectric point(IEP) of coated Si3N4 was different from that of as-received Si3N4.The IEP of Al(OH)3-coated Si3N4 occurred at pH8.4, which is close to that of alumina .When Al(OH)3-coated Si3N4 particles were coated with Y(OH)3,the IEP of coated Si3N4 powder shifted from pH8.4 to pH9.2 ,similar to that of yttria.In addition ,the rheological data showed that Al2O3 and /or Y2O3 coated Si3N4 suspension is nearly Newtonian and that added Si3N4 suspension shows a shear rate thinning behavior.     

Effectiveness of spatial representation in the formation of network communities: experimental study on community organizer

In this paper, we present and discuss Community Organizer, a system designed to support network communities. The main characteristic of Community Organizer is the use of spatial representations for the relationships among community members including the communications exchanged among these members. These spatial representations reflect the degree of closeness of interests and concerns among the members, and are intended to provide users with clues on how to form network communities. In order to investigate the effectiveness of the proposed spatial representations, we conducted experiments with two different versions of the software. One version offered meaningful spatial representations while the other version did not. The subjects who used the former software version felt a greater sense of ‘community’, enjoyed using the software more, and actively used it longer than the subjects using the latter software version (control condition). These results indicated that the proposed spatial representations are effective in supporting network community formation.     

Time dispersion in large plastic scintillation neutron detectors

Time dispersion (TD) is computed for large neutron detectors using plastic scintillators. It is shown that TD seen by the photomultiplier (PM) tube does not necessarily increase with incident neutron energy, which is a result not fully in agreement with the usual finding     

有限缓冲区FMS的特征分析与托盘配置

本文研究了Ｊｏｂ－Ｓｈｏｐ型有限缓冲区ＦＭＳ的运行特性及托盘优化配置问题，给出了系统的分析模型及托盘优化算法。本文的结果对系统的分析与设计具有重要的实际意义。     

外压作用下套管抗挤强度研究

为提高套管挤毁压力的计算精度,应用统计方法对213根套管全尺寸挤毁试验数据进行了方差分析。结果表明,径厚比、屈服强度是套管抗挤强度的主要影响因素,不圆度、壁厚不均度、残余应力等因素对套管抗挤强度的影响呈随机性分布。利用有限元方法对外径不圆度、壁厚不均度和残余应力的不同组合进行模拟分析得出,数值相同的外径不圆度、壁厚不均度及平均残余应力组合不同时,套管的挤毁压力相差很大。提出了新的套管挤毁压力计算公式,计算表明精度可满足工程要求。     

X80级管线钢管工程应用的几个问题

在对国内外大量文献和实际管道建设情况调研分析的基础上,结合国内X80级管线钢管的研究开发和产品试制结果,对我国管道界普遍关心的X80级管线钢管工程应用中的几个问题进行了论述.结果表明,采用高压输送及选用高钢级管材可以大量节约建设成本,是天然气管道发展的重要趋势.X80级已是国际上成熟的和标准的管线钢钢级,国际上在管道设计、生产、施工和运营等方面已有成熟经验.国内经过几年的研究开发首批试制的X80级管线钢管质量指标满足要求严格的X80级管线钢管应用工程标准要求,钢管实物质量与国外同类产品处于同一水平.国际上对输送普通天然气的X80级管道的断裂控制问题已经解决,根据对X80级管道启裂韧性和止裂韧性的分析研究及管道运行安全性的分析,用减薄壁厚的X80级替代X70级是安全的,也是可行的.未来X80级管线钢管在国际上的应用将会越来越广泛.实施X80级管线钢管工程应用是十分必要的.建议在未来大口径高压输气管线中优先选用X80级管线钢管.     

一种基于数字电视系统的数据传输技术研究

数字电视是较为成熟和先进的信息传输技术，详细介绍一种通过数字电视系统传输数据的方法。     

独立项目分析公司项目后评价方法体系简述

介绍该公司(简称IPA)的项目后评价做法与特点,与亚行的项目绩效审核评价进行比较.前者侧重于项目管理,旨在通过改善项目管理提高投资效率;后者侧重于投资管理,旨在通过改善投资过程的监督提高投资效率.     

安全:爆破工程永恒的主题——2001年重大拆除爆破工程回顾

通过对2001年我国重大拆除爆破工程的回顾,认为在提高大面积毫秒非电起爆网络可靠性,控制爆破震动、扬尘、噪声等环境影响,与机械清理配合,实现快速施工等方面取得了进展与突破;对几起爆破安全事故进行了初步分析.为保证拆除爆破工程安全,在加强理论研究、开展技术创新、建立科学有序的管理制度等方面提出了建议意见.